MUIDs Explained: When They're Needed, Adding People to More Locations, and Fixing Associations

1 min read

A MUID (Multi-Unit ID) is the unique ID that ties one person record in FranConnect to every location that person is associated with. MUIDs apply to both Owners and Employees.

This article explains when a MUID is needed, how to add an existing person to more locations, and how to remove an association that was added by mistake.

Before you begin

You need the proper privileges in Information Manager to perform this action. If you do not have them, contact your corporate administrator to request access or to make the change.

Note

Some older Help Center content describes the MUID as an owner-only field. That reflects the legacy design. In the current People module, Owners and Employees each have their own MUID.

Personal ID vs. MUID

Owners and Employees are identified differently. A MUID is the ID that identifies a person across multiple locations.

  • Owners: the system always generates a Personal ID when the profile is created. The Personal ID becomes the MUID.
  • Employees: unless the Employee is created with a MUID from the beginning, the system also generates a Personal ID, which is converted into the MUID.
  • MUID: required once a person is associated with more than one location, and optional for a single location.

Once a person is associated with more than one location, the generated Personal ID is used as the MUID. To use your own MUID format instead of the generated value, submit a helpdesk ticket to have it changed.

When a MUID is needed

A MUID is required when a person is associated with more than one location, and optional when the person has only one.

Person One location Two or more locations
Owner MUID optional MUID required
Employee MUID optional MUID required
  • Each person, Owner or Employee, has their own MUID. An employee cannot share an owner's MUID.
  • The MUID must not already be in use.
  • If the person already has a MUID, the existing MUID is used. Enter a MUID only if none has been assigned.

Add an existing Owner or Employee to another location

Note

You need the proper privileges in Information Manager to perform this action. If you do not have them, contact your corporate administrator to request access or to make the change.

Use Manage Associations on the person's existing record. Do not create a second profile for the same person at the new location.

  1. Go to Information Manager > People.

    Information Manager menu with People highlighted.
  2. Search for the person.

    Press Enter to see the full list of matches, rather than picking one from the drop-down suggestions.

    Search box with a person's name typed in and the drop-down results below it.
  3. Click the three-dot menu on the person's row.

    Note

    In the MUID column, a value that starts with PID- is a generated MUID. Owners always have one. Employees have one unless they were created with their own MUID.

    People list with the three-dot menu highlighted on the person's row.
  4. Click Manage Associations.

    Three-dot menu with Manage Associations highlighted.
  5. Open the Associate Unit(s) drop-down.

    Manage Associations page with the Associate Unit(s) drop-down highlighted.
  6. Check the location to add.

    Search for the location and check its box. A MUID is required once a person has more than one location. For an Owner, the Personal ID becomes the MUID. For an Employee, the MUID is created when the Employee is created with multiple locations. A separate article explains that process.

    Associate Unit(s) drop-down with a location searched and checked.
  7. Click Save.

    Save button highlighted at the bottom of the page.
Note

Why not create a new profile instead? Duplicate profiles are not synchronized, which leads to inconsistent records. One person should have one MUID.

To add a location for a brand-new Owner or Employee instead, select the locations and enter the MUID when you create the person in Information Manager > People.

Remove an incorrect location association

If a person was associated with the wrong location, remove that one association. You can remove it from the person's record or from the location.

From the person's record

Follow steps 1 to 4 in Add an existing Owner or Employee to another location to open Manage Associations for the person. Then follow these steps:

  1. Expand the location you want to remove.

    Note

    If other items are associated with the unit, a table with Item, Count and Reassign To columns may appear. Items that are not reassigned stay assigned to the person you are disassociating from the unit.

  2. Check Disassociate this Unit from the User in that unit.

    Associated unit expanded with the Disassociate this Unit from the User check box highlighted.
  3. Click Save.

    Save button highlighted at the bottom of the page.

From the location

  1. Go to Information Manager > Stores.

    Information Manager menu with Stores highlighted.
  2. Search for the location.

    Search box with the location name typed in and matching locations listed below.
  3. Click the location name.

    Location list with the location name highlighted.
  4. Click Owners.

    Location menu with Owners highlighted.
  5. Click the three-dot menu next to the owner.
  6. Click Disassociate.

    Owners list with the three-dot menu (A) and the Disassociate option (B) highlighted.

From the location — Employees

Note

The location's Users tab (used in the Owners flow above) lists every active user regardless of whether they are an Owner or an Employee. The Employees tab lists Employees specifically, whether or not they have an active user account.

  1. Go to the location's Employees tab.
  2. Click Delete next to the employee's row.

    Confirmation dialog: Are you sure you want to delete this Employee? If this is their only location, the account will be deleted. Otherwise, they will just be removed from this location. This action is irreversible.
Warning

This action is irreversible. If the employee is associated with other locations, deleting them here only removes them from this location. If this is their only location, deleting them removes their entire account.

For another way to remove an Employee from a location, see Location Manager Removing Employee from a Location.

Choosing a MUID

Your company chooses its own MUID format. Many companies use the person's name, for example janesmith or jane.smith, but any format works as long as every MUID is unique. If two people would get the same value, such as two people named Jane Smith, add something to tell them apart, for example a number (jane.smith2).

A MUID cannot be edited once it is saved, so check the value before you click Save. To change a saved MUID, submit a helpdesk ticket.

FAQ

Why am I asked for a MUID when I add a location?

The MUID links one person record to all of that person's locations. It is required once a person has two or more locations.

How do I fix a location that was added to the wrong person or added by mistake?

Use Manage Associations and check Disassociate this Unit from the User, or disassociate the owner from the location's Owners tab. For an Employee, use Delete on the location's Employees tab instead. See Remove an incorrect location association.

Was this article helpful?
Your feedback helps us improve our documentation.